Mobile Electromagnetic Shielding Room Menu(Tap to display menu)
EMC Countermeasure Products
EMI Shielded Vehicle
Noise leakage prevention in accordance with the Radio Law, various EMS and EMI tests are possible
made in Japan
EMI Shielded Vehicleは
Recommended for businesses with the following concerns
- ● We do not have the space to install a shielded room within our company, but we need one as an experimental facility.
- ● We have multiple factories and research facilities and would like to test equipment at each location as necessary.
- ● Other divisions have shielded rooms, but they are always full and there is a waiting list.
- ● The rental fees for shielded rooms are high, reservations cannot be made immediately, and time constraints slow down development.
- ● I want to take the time to think about ways to reduce the noise level of equipment that has failed EMI standard tests.
- "EMI Shielded Vehicle" will solve all of these problems.
- Broadband high-performance electromagnetic shielding performance (has a resonant frequency band equivalent to the housing)）
-
Electromagnetically shielded vehicles have sufficient shielding performance, allowing them to block external noise, prevent noise leakage in accordance with the Radio Law, and perform various EMS and EMI tests.
Magnetic field shielding factor from 10kHz to 10MHz
- １） 10 kHz ～ 50 kHz 37.79dB ～ 49.52dB
- ２） 100kHz ～ 500 kHz 54.38dB ～ 64.95dB
- ３） 1000kHz ～ 10MHz 69.42dB ～ 72.56dB
Electromagnetic shielding rate from 100MHz to 1GHz
- ４） 100MHz ～ 1GHz Horizontal polarization 51.1dB ～ 68.6dB Vertical polarization 49.6dB ～ 68.9dB
Electromagnetic shielding rate from 1GHz to 6GHz
- ５） 1GHz ～ 2.6GHz Horizontal polarization 45.2dB ～ 55.6dB Vertical polarization 41.4dB ～ 60.1dB
- ６） 2.7GHz ～ 4.3GHz Horizontal polarization 42.1dB ～ 52.7dB Vertical polarization 42.3dB ～ 56.4dB
- ７） 4.4GHz ～ 6GHz Horizontal polarization 35.4dB ～ 46.9dB Vertical polarization 37.4dB ～ 47.9dB
- It does not take up space in the office and can be used freely 24 hours a day at a convenient location.
-
It can be self-driving and set up in a factory or parking space, eliminating the need to set up shielded rooms at multiple locations, reducing capital investment and eliminating the need for installation space.
When renting an anechoic chamber or shielded room, product development takes time if multiple visits are required for the procedure of standards testing → countermeasures testing → standards testing → certification testing. However, by installing a shielded room nearby, standards testing and countermeasures testing can be performed 24 hours a day, shortening the product development period.
EMI Shielded Vehicle Specifications (Patent Pending)
Exploded view
- 1.Aluminum panel box
- 2.Stainless steel ceiling and walls
- 3.Stainless steel bulkhead
- 4.Magnetically sealed door
- 5.Connector Panel
- 6.LED lighting (with recessed electromagnetic wave blocking stainless steel mesh cover)
- 7.LED lighting (external type)
- 8.Electrical System
- 9.Air Conditioning System
- 10.Upper storage compartment
- 11.Acrylic double glazed window
- 12.Baggage door (opening: width 700 x height 900 mm)
- 13.Private generator
- 14.Measuring Instrument Storage Cabinet１
- 15.Measuring Instrument Storage Cabinet２
- 16.Measuring Instrument Storage Cabinet３
- 17.Measuring Instrument Storage Cabinet４
- 18.large Measuring Instrument Storage Cabinet５
| Dimensions | Width (W) x Depth (D) x Height (H) |
|---|---|
Electromagnetic shield room interior dimensions |
1930X1990X1880mm |
Operation room interior dimensions |
1930X1490X1930mm |
- Power Supply and Connector Panel Specification Table -
External power supply (according to customer's equipment) |
|
|---|---|
Specifications |
specification |
Supply voltage |
100V |
Maximum power |
1500W |
Power Breaker |
Single phase, two wire、100V、50/60Hz、15A |
Self-powered battery 【TEC29】 |
|
Specifications |
specification |
Supply voltage |
230V士10% |
Reduce pressure with down transformer |
100V士10% |
Maximum Continuous Power |
2600W士5% |
Power Breaker |
Single phase, two wire、100V、50/60Hz、30A |
frequency |
50/60Hz士1% |
DC current |
12V/10A |
Total Harmonic Distortion(THD) |
0.01 |
Fuel consumption (gasoline) |
230g/HP/h |
Connector Panel |
|
N type x 2, BNC type x 3, USB x 1, LAN x 2, Through tube inner diameter q)25 x 1, Power noise filter inlet x 1 |
|
- CREA 5.3 Base vehicle specification -
| base | Toyota Camroad |
| engine Diesel turbo |
1ＫＤ(3000ｃｃ) |
| transmission | 4-speed floor-ＡＴ |
| Maximum power | 144ＰＳ/3400ｒｐｍ |
| Maximum torque | 30.6ｋｇ/1200～3200ｒｐｍ |
| full length | 5190ｍｍ |
| Width | 2070ｍｍ |
| Height | 2910ｍｍ／2ＷＤ 、4ＷＤ |
| Alternator | 130Ａ |
| Air conditioning | Front air conditioner |
| Heater | Front only |
| Front seats | Fabric upholstery 3-seater |
| Seat reclining | D seats + P seats |
| audio | Radioless + 2 speakers |
| Central door locking | D seats + P seats |
| Windshield wipers | Intermittent type (with timer) |
| Power windows | Standard Equipment |
| ＡＢＳ | 4WD |
| Minimum turning radius | 4.9ｍ |
| Fuel tank | 80L |
| Sun visor | D seats + P seats |
| Airbags | D seats + P seats |
| Side glass | UV-cut glass |
| mirror | P-seat electric storage + P-seat long stay |
| Wide tread | Standard Equipment |
| Immobilizer | Standard Equipment（Anti-theft devices） |
| G Package | Standard Equipment |
| Wood grain panel, passenger sun visor, wireless door lock, intermittent windshield wipers with timer, windshield with top shade | |
Price (excluding tax and other fees) and delivery time
| Mobile shield room unit price | 25 million yen※ |
| Delivery time (production factory capacity is insufficient) | Orders suspended. Rental only. |
※The price is for the model product (specification listed on the website).
- Please use it not only for shielded room use but also for standard tests and countermeasure tests.
- We have an EMI countermeasure test system available, which allows us to measure the relative noise level exceeded in an anechoic chamber.
To the corresponding standard test