Research and Development Menu (Tap to Display Menu)
Conductivity and Other Physical Properties
The table below shows the conductivity (surface resistance) and other physical properties. Additionally, it compares post-washing properties using different washing methods.
| Initial (Warp/Weft) | Washing: JIS L0217 Method 103 | Washing: JIS 1042 Barkley Method DC5 (Warp/Weft) | Remarks | ||
|---|---|---|---|---|---|
| HL5 (Warp/Weft) | HL10 (Warp/Weft) | ||||
| Surface Resistance (Ω/10×10cm) | 1.4/3.0 | 1.6/4.0 | 2.4/3.3 | 2.2/4.8 | See below |
| Shrinkage Rate (%) | - | 3–8/0 | 8–14 / -13 to -6 | 1/3 | "+" indicates shrinkage, "−" indicates elongation |
| Tensile Strength (kgf) | 3.1/2.2 | - | - | - | 2.5 cm width |
| Tear Strength (kgf) | 0.2/0.2 | - | - | - | Single tongue method |
| Surface Resistance Measurement Method (Measurement Conditions) |
|---|
|
