【Purpose of introduction】

Due to electromagnetic noise generated by the Wi-Fi spots and surrounding booths at the exhibition venue, the Bluetooth function of our "Wearable" product did not work properly, making it impossible for visitors to experience the product.

【Reasons for introduction】

It was determined that the performance of the EMCtent (W2.7 x D2.7 x H2.7m MGnet2 Layer) would block out external noise and allow the Bluetooth functions of our products to operate normally.

【Launch date】

March 2022

【result】

External noise was blocked, and the Bluetooth function was able to finish the exhibition without malfunctioning.

【Purpose of introduction】

Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

It was possible to meet the desired shielding performance and non-standard sizes. Tests can be performed inside the tent without feeling oppressive or confined.

【Launch date】

March 2024

【Purpose of introduction】

Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

It was possible to meet the desired shielding performance and non-standard sizes. Tests can be performed inside the tent without feeling oppressive or confined.

【Launch date】

December 2023

【Purpose of introduction】

Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

It was possible to meet the desired shielding performance and non-standard sizes. Tests can be performed inside the tent without feeling oppressive or confined.

【Launch date】

December 2023

【Purpose of introduction】

Wireless power transmission using 5.7GHz microwave band and interference countermeasures with other systems

【Reasons for introduction】

Because it is mesh, it allows good visibility from the outside, making it ideal for use in exhibitions. A small window for bringing in equipment could also be installed on the opposite side to the entrance.

【Launch date】

September 2023

【Purpose of introduction】

Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

It was possible to meet the desired shielding performance and non-standard sizes. Tests can be performed inside the tent without feeling oppressive or confined.

【Launch date】

May 2023

【Purpose of introduction】

Evaluation during Research & Development.

【Reasons for introduction】

It met all of the desired conditions for shielding performance and durability.

【Launch date】

March 2023

【Purpose of introduction】

Measures to prevent electromagnetic wave leakage from equipment.

【Reasons for introduction】

It can be folded and stored. Its performance does not deteriorate even if it is folded repeatedly.

【Launch date】

January 2023

【Purpose of introduction】

Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

It was possible to meet the desired shielding performance and non-standard sizes. Tests can be performed inside the tent without feeling oppressive or confined.

【Launch date】

December 2022

【Purpose of introduction】

• Clinical use of medical devices is carried out within the EMCtent.

【Reasons for introduction】

• It was also possible to meet the desired shielding performance and non-standard sizes.
• Tests can be performed inside the tent without feeling any pressure or obstruction.

【Delivery Date】

November 2022

【Purpose of introduction】

• We decided to use the measuring device inside a tent because it seemed to meet the equipment conditions specified by the Ministry of Internal Affairs and Communications when using the noise simulator for the measuring device.

【Reasons for introduction】

• No air conditioning or lighting is required inside the tent.
• Complies with the Fire Service Act.

【Delivery Date】

November 2022

【Purpose of introduction】

Due to electromagnetic noise generated by the Wi-Fi spots and surrounding booths at the exhibition venue, the Bluetooth function of our "Wearable" product did not work properly, making it impossible for visitors to experience the product.

【Reasons for introduction】

It was determined that the performance of the EMCtent (W2.7 x D2.7 x H2.7m MGnet2 Layer) would block out external noise and allow the Bluetooth functions of our products to operate normally.

【Launch date】

March 2022

【result】

External noise was blocked, and the Bluetooth function was able to finish the exhibition without malfunctioning.

【Purpose of introduction】

• It was determined that testing of equipment development was necessary inside a shielded tent.

【Reasons for introduction】

• This is because leakage from inside the tent can be kept below the standard value.

【Delivery Date】

March 2022

【Purpose of introduction】

• Wireless system evaluation tests were conducted inside a shielded tent.

【Reasons for introduction】

• This is because leakage from inside the tent can be kept below the standard value.

【Delivery Date】

December 2021

【Purpose of introduction】

• For use in the laboratory.

【Reasons for introduction】

• Since it was for a limited period of time, it needed to be easy to install without being fixed to the floor.

【Delivery Date】

July 2020

【Purpose of introduction】

• Used during game development.

【Reasons for introduction】

• This is because leakage from inside the tent can be kept below the standard value.

【Delivery Date】

October 2019

【Reasons for introduction】

• This is because leakage from inside the tent can be kept below the standard value.

【Delivery Date】

October 2019

【Purpose of introduction】

• We decided to use the measuring device inside a tent because it seemed to meet the equipment conditions specified by the Ministry of Internal Affairs and Communications when using the noise simulator for the measuring device.

【Reasons for introduction】

• No air conditioning or lighting is required inside the tent.
• Complies with the Fire Service Act.

【Delivery Date】

May 2019

【Purpose of introduction】

• To comply with the Radio Law when testing the app's operation on a smartphone.
• Server data leakage prevention

【Reasons for introduction】

• It can be folded and carried repeatedly.
• Leakage from inside the tent can be kept below the standard.
• The wireless LAN access point, power tap, etc. are pulled in from outside the tent, but it was possible to design it to suit the environment of the installation location.
• It complies with fire prevention laws and can be used inside office buildings.

【Delivery Date】

May 2019

【Purpose of introduction】

• In order to speed up the development of 5G devices, EMC countermeasure tests are being carried out. Absorbers are placed inside the shielding tent.
• When developing a 5G app, the radio wave environment will be changed by opening and closing the opening of the tent to verify whether the app operates normally.
• It blocks external noise and prevents electromagnetic waves from leaking from the development equipment outside the tent.

【Reasons for introduction】

• This was the only electromagnetic wave shielding tent that could be folded up and carried around repeatedly.
• It was determined that a netting material with excellent breathability and light transmission is essential for creating a good working environment.
• It complies with fire prevention laws and can be used inside office buildings.

【Delivery Date】

March 2019

【Purpose of introduction】

• In addition to complying with the Radio Law, it will be used to verify the operation of apps by changing the shielding performance (35→45dB) differently from the 2-layer tent introduced last time.

【Reasons for introduction】

• It can be folded and carried repeatedly.
• Leakage from inside the tent can be kept below the standard.
• The wireless LAN access point, power tap, etc. are pulled in from outside the tent, but it was possible to design it to suit the environment of the installation location.
• It complies with fire prevention laws and can be used inside office buildings.

【Delivery Date】

April 19, 2018

【Purpose of introduction】

• To comply with the Radio Law when using and evaluating smartphones that do not have a technical standards conformity mark (a mark certifying compliance with technical standards, etc.) or when verifying the operation of apps using a smartphone.

【Reasons for introduction】

• It can be folded and carried repeatedly.
• Leakage from inside the tent can be kept below the standard.
• The wireless LAN access point, power tap, etc. are pulled in from outside the tent, but it was possible to design it to suit the environment of the installation location.
• It complies with fire prevention laws and can be used inside office buildings.

【Delivery Date】

June 1, 2017

【Purpose of introduction】

• Used in the development of a device that uses high frequency electromagnetic waves to detect drugs hidden inside the body. Both blocking external noise and preventing electromagnetic waves from leaking out of the tent from the device under development are expected.

【Reasons for introduction】

• This was the only electromagnetic wave shielding tent that could be folded up and carried around repeatedly.
• It was determined that a netting material with excellent breathability and light transmission is essential for creating a good working environment.
• It complies with fire prevention laws and can be used inside office buildings.

【Delivery Date】

March 2017

【Purpose of introduction】

• To prevent leaks and intrusions when conducting transmission and reception tests on communication devices used in classes

【Reasons for introduction】

• It is large enough for one worker to enter, and we determined that it would be suitable in terms of the working environment, including ventilation and lighting.
• It can be folded and stored compactly when not in use.
• When used within school buildings, it had to comply with fire safety laws.

【Delivery Date】

December 12, 2016

【Purpose of introduction】

• To prevent electromagnetic waves emitted by the equipment used in the verification from leaking out. The main two points are as follows:
• （1）Avoid interference with the company's wireless LAN environment (5GHz band)
• （2）Radio law measures when verifying devices that do not have a technical certification

【Reasons for introduction】

Because the property is located in a high-rise building, if the property is deemed a "fire-retardant item," it must be a "fire-retardant" product.

• The material is a coarse mesh.
• The sprinklers also spray water directly into the tent.
• It is freestanding without being fixed to the floor or ceiling, and is lightweight, making it easy to move.

Another factor in deciding to introduce the system was the fact that the local fire department confirmed that it did not violate the Fire Service Act.

【Delivery Date】

August 30, 2016

【Purpose of introduction】

• To prevent leakage to and intrusion from the outside when conducting radio wave reception tests
• Because performance cannot be ensured with existing shielding boxes alone

【Reasons for introduction】

• Because it will be used in conjunction with the existing shielding box, it only needs to be large enough for one worker to fit inside, but it was also determined that it would be suitable in terms of the working environment, including ventilation and lighting.
• If you require maintenance after one year, please send us just the tent fabric.

【Delivery Date】

August 30, 2016

【Purpose of introduction】

Used in the development of devices that use frequencies below the MHz band. It is expected to block external noise (mainly AM/FM radio and cell phone signals) (or reduce it to a level that does not affect the safety) and to prevent electromagnetic waves leaking from the device under development from leaking outside the tent.

【Reasons for introduction】

It was determined that a netting material with excellent breathability and light transmission is essential for creating a good working environment.

【Delivery Date】

February 2016

【Purpose of introduction】

When conducting electrostatic tests in an electrostatic test environment that complies with the EN/IEC61000-4-2 standard, the use of a shield tent is being considered to prevent leakage of noise with frequencies from several hundred MHz to 1 GHz or 2 GHz.

【Reasons for introduction】

• Leakage from inside the tent can be kept below the standard.
• Large sizes (W4000 x D3000 x H2000mm) can be manufactured to order.
• In consideration of the environment of the installation location, it was determined that there was no need for ventilation or lighting on the two sides that come into contact with the wall, and by using a normal conductive fabric, costs were reduced without compromising performance.

【Delivery Date】

September 18, 2015

【Purpose of introduction】

To comply with the Radio Law when using and evaluating smartphones that do not have a technical standards conformity mark (a mark certifying compliance with technical standards, etc.) or when verifying the operation of apps using a smartphone.

【Reasons for introduction】

• It can be folded and carried repeatedly, and it complies with fire prevention laws and can be used inside office buildings.
• Leakage from inside the tent can be kept below the standard.
• The wireless LAN access point, power tap, etc. are pulled in from outside the tent, but it was possible to design it to suit the environment of the installation location.
• The ventilation and lighting are superior to other companies' products, resulting in less work stress.

【Delivery Date】

June 5, 2015

【Purpose of introduction】

• Evaluation tests are conducted in an environment where external noise is eliminated during the development stage of cameras and image sensors.
• We are considering a dual-purpose facility that can also be used as a darkroom (a light-blocking room) to check the performance of image sensors.

【Reasons for introduction】

• It can be folded and carried repeatedly, and it complies with fire prevention laws and can be used inside office buildings.
• This was because it was possible to create equipment that could block external radio waves (cell phone bands and terrestrial digital broadcasting bands) and also provide a darkroom for checking the performance of the image sensor.
• Since it is installed in office space, it can be disassembled and stored for added convenience.

【Delivery Date】

March 26, 2015

【Purpose of introduction】

Since the 2kW output and 100kHz plane waves generated by a non-contact charging system for electric vehicles exceed the standards set by the Radio Law, the aim is to conduct experiments inside an EMCtent to bring them within the standard values.

【Reasons for introduction】

• Shielding data for the low frequency band (100 kHz band) was submitted.
• It can be easily disassembled after testing is completed, and requires less storage space.
• The ventilation and lighting are superior to other companies' products, resulting in less work stress.

【Delivery Date】

July 11, 2014

【Purpose of introduction】

The purpose of the experiment is to conduct it inside the EMCtent, as there is a possibility that radio waves exceeding the standards set by the Radio Law may be generated.

【Reasons for introduction】

• They provided us with a demo unit, which enabled us to verify whether the shielding performance was at a level that would actually be useful for testing.
• It can be easily disassembled after testing is completed, and requires minimal storage space.
• The ventilation and lighting are superior to other companies' products, resulting in less work stress.
• It can be folded repeatedly and carried around, complies with fire prevention laws, and can be used inside school buildings.

【Delivery Date】

March 19, 2013